Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Winston-Salem Homeowners
A garage door that drags, sticks, or leaves a gap at the floor makes every trip in and out of the house harder. If the panels are dented, the door is older than the rest of the house, or you’re planning a change, a proper installation fixes the problem at the source. Our technicians have up to 9 years of experience, and we’re trained on the brands already sitting in most Winston-Salem driveways. We give free estimates, quote a written price before any work starts, and schedule installations around your week. Call (877) 692-2814 to set up a measure and a written estimate. We answer 24/7.
Garage Door Replacement
Garage Door Replacement is the full swap of a worn or damaged door for a new one, and it’s usually the right call when panels are cracked, the door sags, or repairs start adding up faster than a new door would. In Winston-Salem’s older neighborhoods, plenty of doors have outlived their hardware by a decade or more, and replacement resets springs, cables, tracks, and opener fit in one project. We measure the opening, help you pick a door style, and install it as a complete system. Typical estimated new door installation runs $700-$2,200 depending on size, material, insulation, and opener work, and the written estimate sets the final price.
Steel and Insulated Steel Doors
Steel is the most common choice for Winston-Salem homes because it holds up to humidity and temperature swings without warping. Insulated steel adds a bonded core that cuts noise and helps steady the garage temperature. Clopay and Amarr both make steel lines in a wide range of panel patterns and colors.
Wood, Composite, and Carriage Styles
Wood and composite doors give a home real character, and carriage-house designs suit the older brick and siding homes around town. Composite holds paint and resists moisture better than raw wood. Wayne Dalton and Amarr both offer carriage profiles with the hardware to match.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Installation Service
Garage Door Installation Service covers everything from measuring the opening to hanging the panels, setting the springs, and dialing in the opener. You need it when a door is new to the house, when the existing door has reached the end of its service life, or when a remodel changes the opening. We handle the door, the torsion or extension springs, the tracks, and the opener in one project so nothing gets left for a second contractor. Typical estimated installation runs $700-$2,200 depending on door size, material, insulation, and whether the opener is replaced at the same time. The written estimate sets the final price before we start.
Measuring and Site Check
The first visit is a measure, not a sales pitch. We take the opening height and width, check the headroom and side clearance, and look at how the current door is hung. That tells us which door sizes and spring types will actually fit your garage.
Removing and Disposing of the Old Door
On a replacement, the old door comes down before the new one goes up. We take the panels and hardware away with us so you’re not left with a pile in the driveway. Any brittle springs or frayed cables come off during this step, handled with the right tools.
Commercial Garage Door Installation
Commercial Garage Door Installation is the installation of sectional doors, rolling doors, and high-lift setups for shops, warehouses, and small business buildings. You need it when a business door is too slow, too worn, or sized wrong for the loading pattern. These doors take heavier cycling duty than a home door, so we size the springs and opener for the traffic the door will actually see, not just the opening. Typical estimated door installation runs $700-$2,200, with commercial doors often landing toward the upper end once size and cycle life are factored in. The written estimate sets the final price.
Doors for Shops and Storage Buildings
Small commercial spaces around Winston-Salem often need doors that open wide and close flush to keep weather and debris out. We spec panels and tracks that fit the building, not a residential door bolted to a commercial opening. The opener is matched to the door weight so it doesn’t strain.
High-Cycle Hardware
Commercial doors open and close far more often than a home door, so standard hardware wears out fast. Higher-cycle springs and heavier rollers stretch the service life. We look at how many cycles a day the door runs before choosing the hardware.
Garage Door Installation Contractors
Garage Door Installation Contractors are the professionals who measure, supply, and fit the door and its hardware as one job. Hiring the right one matters when a job is more than a straight swap, like a new opening, a wider door, or a door that needs structural changes at the header. We handle the full system – panels, springs, cables, tracks, and the opener – so you aren’t coordinating between a door company and a separate opener installer. Typical estimated installation runs $700-$2,200 depending on door and opener choices. The written estimate sets the final price before any work starts.
What to Ask Before You Hire
Ask whether the quote includes the opener, springs, and disposal of the old door, and ask for the price in writing. A clear contractor will spell out what’s included and what isn’t. We put everything in the written estimate so there are no surprises.
Working With a Multi-Brand Specialist
A specialist who works across brands can match the door to your home instead of steering you to one product line. We’re trained on eight major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman. That means the door you get is the right fit, not just what’s in stock.
Garage Door Seal Installation
Garage Door Seal Installation is fitting a new bottom seal, threshold, or perimeter weatherstripping so the door closes tight. You need it when daylight shows under the door, the old seal is cracked or torn, or wind and rain push grit inside. Seals are cheap insurance against drafts and water damage, and they take a short visit to replace. A bottom seal replacement usually comes in at the low end of our $150-$600 garage door repair range, and the written estimate sets the final price. We check the seal and the door’s close before we finish, so the door seats evenly on the new material.
Bottom Seals and Weatherstripping
The bottom seal is the rubber or vinyl strip that touches the floor, and it’s the first thing to fail as it ages. We fit a seal with the right profile for your door’s track and threshold. Perimeter strips around the frame stop wind-driven rain from sneaking in at the sides.
Checking for Gaps and Draughts
A new seal only works if the door closes square. We check the gap along the floor and look for high or low spots in how it seats. If the door is riding off level, we note it so it can be corrected with the seal.
New Garage Door Installation
New Garage Door Installation is fitting a brand-new door on a home that may never have had one, or replacing a door at full end of life rather than patching it. It’s the right call for a new build, an addition, or a garage being converted to a working space. We measure the opening, spec the door and springs for the weight, and hang the whole system in one go. Typical estimated new door installation runs $700-$2,200 depending on size, material, insulation, and opener choice. The written estimate sets the final price before we lift a single panel. If part of your system is fine and only the opener is failing, our garage door opener repair service can often save the door.
Choosing the Right Size and Material
Doors come in standard widths and in custom sizes, and the material decides how much maintenance the door needs. Steel suits most homes and holds up to weather; wood and composite add character but need more care. We walk you through the trade-offs so the door fits your budget and your house.
Springs and Opener Matching
A new door needs springs rated for its weight and an opener sized for the drive. If either is mismatched, the door runs hard and wears out early. We match both to the door before it goes up.
Brands We Service
We service Clopay doors and know where their panel seams and hardware tend to wear, which helps when we’re setting up a matching opener. Clopay’s residential lines are built for the kind of moderate humidity Winston-Salem sees, and their insulated steel doors are a solid fit for garages with living space above. Amarr is another line we know well, especially their steel and composite carriage profiles. When we install an Amarr door, we size the springs to the actual panel weight so the door cycles smoothly from the first day.
Wayne Dalton and Craftsman are both common in this area, and we understand the quirks of each. Wayne Dalton’s hardware has specific tolerances we account for during install, and Craftsman openers need a compatible drive setup to run reliably with a new door. Whether you have Clopay, Amarr, Wayne Dalton, Craftsman, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door sags or looks crooked. A door hanging at an angle usually means a spring or cable has let go. That’s a safety issue, not a cosmetic one, and it needs a trained technician.
- Panels are cracked or dented. Cracks let water in and weaken the structure. Small dents can sometimes be patched, but badly cracked panels are a replacement signal.
- The door won’t stay up or slams down. This points to a spring failure or a broken opener. Don’t force it; a falling door can cause serious injury.
- Daylight under the door. A visible gap means the seal has failed and weather is getting in. It’s a quick fix that protects the garage floor and anything stored there.
- The opener strains or the door reverses. A door that reverses on its own or struggles to lift often has a binding track or a tired opener. We diagnose which before recommending a fix.
Our Process, Step by Step
- 1
Free measure and written estimate. We visit, measure the opening, check headroom and side clearance, and look at the current door and opener. You get a written estimate with the door, springs, and any opener work spelled out.
- 2
Choose the door and hardware. We walk you through size, material, and insulation options, and we match the springs to the door’s weight. For openers, we confirm the drive type fits your door and opener brand.
- 3
Order and schedule. Once you approve the estimate, we order the door and parts and set an installation date. We give you a clear window so you can plan around it.
- 4
Remove the old door and install the new one. We take down the old door, dispose of it, and hang the new panels, tracks, and springs. Springs and cables are handled with proper tools; this is the step where DIY work is most dangerous.
- 5
Test, adjust, and walk you through it. We cycle the door, check the balance and the seal at the floor, and adjust the opener limits and safety reverse. Then we show you how the door runs and what to watch for.
How Much Does Garage Door Installation Cost in Winston-Salem?
A typical new garage door installed in Winston-Salem runs $700-$2,200, depending on door size, material, insulation, and whether you replace the opener at the same time. A basic single-car steel door sits at the low end, while a double-car insulated door with a new opener lands toward the top. If you’re replacing rather than installing fresh, new garage door installation pricing applies the same way, and panel replacement on an otherwise sound door usually runs $250-$500 per section. Opener installation, when done alongside the door, typically adds $250-$550. If only part of your system needs help, our garage door repair service covers springs at $180-$340 per spring and cables at $130-$250, and a matched spring pair costs about twice the single-spring range.
What moves the price most is the door itself: material, insulation, and custom sizing. Opener type and any track or frame work add to it. To avoid overpaying, get the estimate in writing with the door, springs, opener, and disposal all listed, and confirm the price is set before work starts. Our free estimate covers the measure, the door options, and a clear written price, so you know what you’re paying for before anything is ordered.
Our Service Area Near Winston-Salem
We work with homeowners across Winston-Salem and the towns around it, including Clemmons, Rural Hall, Lewisville, Bermuda Run, and King. Folks in Welcome, Midway, Tobaccoville, Tyro, Lexington, and Mocksville are in range too. For installation, we schedule a measure and an install window that fits your week; there’s no need to rush a door that’s measured and ordered properly. Winston-Salem homeowners can reach us at (877) 692-2814 to get the process moving.
Serving Winston-Salem, NC – Our Local Coverage Area
We serve Winston-Salem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Installation in Winston-Salem
Garage door installation is the complete fitting of a new door and its hardware, including panels, tracks, springs, cables, and the opener if you’re replacing that too. It’s different from a repair, which fixes one failed part on a door that’s otherwise sound. We handle the whole system so the door runs as one unit from day one.
A standard door installation usually takes a few hours, and a door plus a new opener adds a bit more. Custom sizes or a change to the opening can stretch it into a longer visit. We give you a realistic window when we schedule, not a guess on the day.
Typical estimated new door installation runs $700-$2,200, and the written estimate sets the final price. Opener installation adds $250-$550 when done alongside the door. Call (877) 692-2814 for an exact quote; estimates are free.
Yes, we service Clopay doors and work with their steel and insulated steel lines. We also handle Amarr, Wayne Dalton, and Craftsman, among the eight major brands we’re trained on. Whichever brand is on your house, we can measure and install a replacement or a matching door.
No, installation is measured and scheduled rather than same-day work, because the door has to be ordered to fit your opening. Once you approve the estimate, we set an install date and give you a clear window. If your current door has failed and you need it working sooner, call us and we’ll book the fastest opening; we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Yes, we stand behind our installation work and the door and hardware we fit. Warranty terms vary by door and opener brand, so we go over them with you when you approve the estimate. You’ll know what’s covered before we start.
Clear the garage floor and the area around the door so the crew has room to work safely. Move anything fragile away from the opening and make sure the driveway is accessible. If you’re having a new opener installed, let us know where the existing controls are mounted.
Schedule Your Garage Door Installation Service in Winston-Salem Today
Ready to replace a worn door or put a new one on your Winston-Salem garage? Call (877) 692-2814 for a free, no-obligation estimate. We answer 24/7, and we’ll set up a measure and a written price before anything is ordered. Our technicians have up to 9 years of experience, and we’ll match the door and opener to your home. One call, full system.
Written by the team at Crescent Garage Door Repair.