Panel Replacement Cost in Winston-Salem - Typical Price Ranges, Then Your Exact Quote

Typical price ranges for the work, then a free exact quote for your door. No call-out fee to find out where you land, and the price is agreed before work starts.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (877) 692-2814

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate
Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Panel Replacement Cost in Winston-Salem?

Panel replacement in Winston-Salem typically costs $250 – $500 for a section of panels, and most single-panel jobs land in the lower half of that range at an estimated $250 – $350. A job that involves multiple panels, a discontinued profile, or a full-section swap runs toward the top at $400 – $500. These are typical estimates for this market; a free on-site assessment and the written estimate set the final price.

Here’s the short version: you’re paying for the panel itself, the labor to seat it correctly on the existing tracks, and the hardware that has to be reset once the door is back in balance. The rest of this guide breaks out those numbers, explains what pushes a Winston-Salem job up or down, and how to tell when a panel swap is the right call instead of a whole new door.

Key Takeaways

  • Typical panel replacement in Winston-Salem: $250 – $500, with most single panels running $250 – $350.
  • Panel cost is driven by brand, material (steel, aluminum, wood-look composite) and whether the manufacturer still makes your profile.
  • Matching an older door is the single biggest cost variable in this market, where plenty of homes still carry doors installed decades ago.
  • Free estimates and upfront pricing mean you’ll know the number before any work starts.
  • Our technicians have up to experience, and we work on the brand you already have.

Panel Replacement Cost Breakdown (2026)

The table below lists typical estimated ranges for each piece of a panel replacement job in Winston-Salem. Your written estimate will reflect the specific door, brand and material on your home.

Line Item Typical Estimated Range
Single panel replacement (full job, supply and labor) $250 – $500
Recommended adjacent panel (matched pair for a clean seam) Add roughly the same as a single panel
Panel replacement as part of broader door repair $150 – $600 (garage door repair range)
Track realignment if the panel was knocked off the track $120 – $240
Roller replacement while the door is apart $110 – $220
Cable repair if a cable frayed from the impact $130 – $250
Full new door installation, if panel work no longer makes sense $700 – $2200

The range moves for a few reasons. A standard steel panel in a common color is the low end. A wood-look composite, a glass-lite panel, a rare color, or an older profile the manufacturer no longer produces pushes toward the high end because the panel costs more or has to be sourced. Labor also climbs when the door has to be partially disassembled, when the tracks are bent, or when the surrounding panels don’t want to line up cleanly with the new one. Windows and decorative inserts add to the panel price too.

The pricing above covers a panel only. If the underlying problem is a snapped torsion spring or a frayed cable lifting the door unevenly, that’s separate work. Spring repair runs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that. Cable repair sits at $130 – $250.

If you’re unsure whether you’re looking at panel damage or a balancing problem, start with our Crescent Garage Door Repair overview so you know what a panel job actually includes before you call.

What Affects Panel Replacement Pricing in Winston-Salem

  • Brand and profile match. Whether your door is a Clopay, Amarr, Wayne Dalton, Raynor or another make changes how easy it is to order a matching panel. We’re trained and experienced on eight major brands, so we can usually order the right profile without guesswork. A discontinued profile is where things get more expensive.
  • Material. Steel is the most affordable and the most common in Winston-Salem neighborhoods. Aluminum, wood-look composite and glass-lite panels cost more and take longer to arrive.
  • Color fade and sun exposure. North Carolina sun can fade a door’s finish over the years, and a brand-new panel can look slightly different in tone next to older ones. Matching the finish often means replacing the adjacent panel too, which doubles the panel portion of the estimate.
  • Whether the tracks or rollers are bent. A common cause of panel damage is a car backing into the door and knocking a section off the tracks. If the tracks bent in the impact, realignment ($120 – $240) or a roller swap ($110 – $220) gets added to the job.
  • Door size and panel count. A single-car door has fewer, narrower panels; a double-car door has wider panels that cost more. The panel count on the door directly affects the supply cost.
  • Whether the underlying hardware is failing. Sometimes a panel is damaged because a spring or cable failed and the door dropped. Fixing only the panel leaves the cause in place, so the estimate may pair panel work with spring or cable repair.

How to Save on Panel Replacement

The biggest saving in this market comes from acting before the damage spreads. A panel that’s off its track for a week tends to bend the tracks and strain the opener, which turns a $250 – $350 panel job into a $500 – $600 repair once you add track realignment and possibly an opener service call.

A few practical moves:

  • Fix the panel promptly if a car hit the door. The sooner the door comes off the tracks, the cheaper the realignment side of the job.
  • Ask for a matched pair when the color has faded. Replacing the single damaged panel sometimes looks worse than replacing the pair; the estimate is transparent about both options either way.
  • Bundle minor hardware while the door is already apart. If rollers are worn or a cable is frayed, combining roller replacement ($110 – $220) or cable repair ($130 – $250) with the panel job can be one visit instead of two.
  • Get the free estimate before deciding repair versus replace. On a door that already has rusted panels, a failing spring and a worn opener, a full new door ($700 – $2200) can be the smarter spend. Call (877) 692-2814 for the free estimate and we’ll walk you through which side of that line you’re on.

When the panel is genuinely beyond repair – a clean tear through the skin, a bent hinge channel, water damage into the core – replacing the panel is the right move. When it’s a small dent under the paint, replacing is usually not necessary. The estimate will tell you which one you’re looking at.

Can You Replace Just One Panel, or Do You Have to Replace the Whole Door?

You can usually replace just one panel. On most residential doors the panels are separate sections held in place by hinges, so one damaged panel can come out and a new one can go in without touching the rest of the door. The full door only comes into play when the tracks are bent beyond repair, the manufacturer’s panel profile is gone, or several panels are damaged at once.

Whether the replacement panel matches the rest of the door is the part worth thinking about. Fresh paint on one panel next to sun-faded panels shows. That’s why a good estimate will quote the single panel and the matched-pair alternative side by side, usually $250 – $350 for one and roughly double for the pair. Then you decide.

Does Panel Replacement Cost More for Certain Brands?

Not exactly, but the brand does affect the panel price and the lead time. Common profiles from Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster and Chamberlain system doors are easier to match, so the panel cost stays in the normal $250 – $500 range. Less common profiles, custom colors and discontinued models cost more and take longer to order.

Because we’re trained and experienced on eight major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – we can usually identify your door and order the right panel without guessing. If your door is a brand we don’t recognize, the assessment still happens the same way: figure out the problem, then find the part that solves it.

If you’re comparing panel repair against a full install, our Winston-Salem service page covers both service lines so you can see what each one includes.

FAQs – Panel Replacement Cost

How much does panel replacement cost in Winston-Salem?

Typical panel replacement in Winston-Salem runs $250 – $500, with most single panels landing around $250 – $350 and multi-panel or hard-to-match jobs closer to $500. The written estimate sets the final price. Call (877) 692-2814 for a free estimate.

Can I repair a damaged garage door panel instead of replacing it?

Often yes, if the damage is shallow – a small dent, a scuff, a spot of rust. Deeper damage (a tear through the metal, a bent hinge channel, water damage into the panel core) usually means replacement, which sits in the $250 – $500 range. A technician can tell you which one you have in a few minutes. Call (877) 692-2814 for a free estimate.

Is it cheaper to replace the whole door or just the panel?

Replacing a single panel is almost always cheaper than a full door. A panel replacement is typically $250 – $500, while a full new door installation runs $700 – $2200. The exception is a door that’s failing in several places at once – rusted panels, a tired opener and worn hardware – where the full door can be the better long-term spend. Call (877) 692-2814 for a free estimate and we’ll quote both so you can compare.

How long does a panel replacement take?

A standard single-panel replacement is usually a same-day job once the correct panel is on hand. The wildcard is ordering time: a common profile can be sourced quickly, while a discontinued or custom panel can take longer. If your door is currently stuck open or off the tracks and you need it secure while the panel ships, call (877) 692-2814 and we’ll explain how to secure it. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Can you come today for a panel replacement estimate?

Yes, same-day estimates are usually available, and we answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 692-2814 for a free estimate. The visit is free, and the written estimate sets the price before any work begins.

Do you need a permit for garage door panel replacement?

Panel replacement on an existing door usually does not require a permit, but if the job grows into a full door replacement or changes the door’s structure, ask the City of Winston-Salem building department before work starts. We’ll flag it during the estimate if it applies to your job.

What brands do you work on for panel replacement?

We work on the brand you already have. Our technicians are trained and experienced on eight widely installed brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. If your door is one of these, we can usually source a matching panel. Call (877) 692-2814 for a free estimate.

What Happens When You Call

When you call, we ask a few questions: door brand if you know it, door size, what happened, and whether the door is stuck open or closed. That lets us bring the right tools and possibly the right panel on the first visit. If the door is stuck open and the house is unsecured, say so – that moves the visit up.

We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is available. The estimate is free, the pricing is upfront, and the work is backed by a satisfaction guarantee. Licensed and insured, and our technicians have up to experience.

A failed panel isn’t a wait-and-see problem. The door is on your house, it’s holding the weather out, and every day it sits off its tracks the repair gets bigger. One call handles the whole door – panels, springs, cables and hardware. We’ll give you the number in writing before we start, so there’s no surprise on the bill.

Call (877) 692-2814 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Pricing reflects the Winston-Salem market as of 2026. Crescent Garage Door Repair offers free estimates – call (877) 692-2814.

Written by the team at Crescent Garage Door Repair.

What Our Customers Say

★★★★★ 4.9 from 8+ reviews

"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."

- Lisa Ackerman

"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."

- Tim Novak

"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."

- Michael Meyer
Need Garage Door help in Winston-Salem? Licensed & insured · same-day response · free estimates
Call (877) 692-2814

Request a Free Estimate

Tell us what's going on in Winston-Salem. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7